03 / BUYER'S GUIDE
A practical way to sell R-123 chillers in Stillwater, Oklahoma
If you have R-123 chillers in Stillwater, Oklahoma, start with the equipment's actual condition and location. We buy used industrial chillers, including machines from 20 to 2,000+ tons, and consider all tonnages and refrigerants. Equipment can come from data centers, decommissioned power plants, refineries, manufacturing shutdowns, hospitals and campuses. The buyer handles crane work, rigging, refrigerant recovery, disconnects, loading and hauling, with all freight covered. No testing is required. Cash offers and payment upfront are available after the equipment and transaction are reviewed.
R-123 machine records and safe recovery planning
R-123 is a legacy HCFC used in some chiller applications, including certain low-pressure machines. Its presence on an old nameplate does not by itself prove the current charge, so include any records of recovery, conversion or major repairs. Photograph the whole chiller and its readable labels, not only the refrigerant designation. Whether the machine is intact, disconnected or inaccessible, the owner can describe its status without starting it or opening the refrigeration circuit. For this equipment, mention any documented conversion or recovery and identify what information remains unknown. If an item is not visible or its history is unknown, say so rather than assigning it a condition. Drawings or records are helpful when available, but the first conversation can begin with clear photographs and the information already on hand.
Nameplates and photographs for R-123 chillers
The most useful first photograph is often the manufacturer's data plate: it can identify the exact model, serial number, capacity, electrical rating and refrigerant. Then photograph the complete machine from enough angles to show its configuration. If the label is painted over or unreadable, send what is legible along with any equipment schedule or manual that clearly belongs to the unit. Cooling capacity in tons is not the same measurement as lifting weight, and neither should be guessed from a photograph. For R-123 chillers, capture the R-123 label, manufacturer, model, serial number and rated capacity.
Access and site details for Stillwater
At a Stillwater campus, institutional or industrial site, explain whether the chiller is connected to a shared cooling system and which surrounding buildings remain occupied. Identify the service drive, loading area and any pedestrian routes. If the machine is below grade or inside a central plant, include stairs, lifts or other elevation changes in the access description. In particular, show the machine-room route, shell ends, connected equipment and access for recovery work. Give approximate measurements where possible and identify a contact who knows the property. These observations support a site-specific plan; they do not replace a professional evaluation of the lifting route or the ground.
Refrigerant and isolation for R-123 chillers
The owner should not open a refrigerant line, vent a charge or energize a retired unit to prepare it for review. The buyer handles refrigerant recovery and disconnects as part of the arranged removal. Facility personnel and the qualified removal team should agree on electrical, water and other utility isolation boundaries before work begins. Tell them about known leaks, prior recovery, disconnected wiring or shared piping; if the status is unknown, say so. A visible disconnect alone does not prove every energy source has been isolated. For this machine, report known R-123 history and leave pressure, refrigerant and isolation checks to qualified personnel.
Rigging, loading and freight for R-123 chillers
For an agreed purchase, the buyer handles rigging and crane requirements, loading and hauling, with all freight covered. Tell the team if the chiller is above grade, below grade or in a crowded machine room, and whether a gate or roof edge limits access. Manufacturer drawings, original shipping dimensions and lifting instructions can support the assessment if available. The physical route, possible staging area and safe lift points must be checked for the particular job; cooling tonnage is not a lifting specification. A refrigerant designation does not establish that the machine has been recovered or made ready to lift. Coordinate recovery and isolation separately from the physical loading plan.
Cash offers and condition review for R-123 chillers
We are a buyer only: we purchase used industrial chillers and do not sell them. Cash offers and payment upfront are part of the buying process, and no equipment testing is required. Send honest information about visible damage, missing pieces, disconnection and the available records. An offer depends on review of the equipment, ownership and practical removal details; it is not an automatic promise to purchase every submission. The owner should identify the person authorized to transfer the equipment and any limits on what is included. A refrigerant label is one part of the description, not evidence that the machine runs or that its current charge has been verified.
Preparing for equipment handoff in Stillwater
Separate the equipment description from the facility's access requirements. Identify the legal owner or authorized representative, list what is included, and describe where the chiller sits today. Note whether the facility requires escorts, permits, protection for occupied areas or coordination with an operating plant. Existing drawings and safe, current photos can help, but missing information should be marked unknown. Pickup and payment details are agreed for the actual transaction rather than inferred from an online description. To start, call (614) 715-3047, text photos, or email saleselectricalbuyers@gmail.com. Include the site city or county and a good contact number, but do not enter restricted areas merely to take pictures.

