OKLAHOMA-WIDE INDUSTRIAL CHILLER BUYERSBUYING ONLY  /  NEVER SELLINGsaleselectricalbuyers@gmail.com
Industrial chiller equipment

Norman chiller buyers · Chiller type

Sell Screw Chillers In Norman, Oklahoma

Sell screw chillers in Norman, Oklahoma. Request a cash offer with payment upfront; no testing is required, and the buyer handles removal and freight.

Upfront payment. We handle the heavy lifting.

Payments Upfront
No Testing
We Cover All Freight
All Tonnages Bought

01 / THE STRAIGHTFORWARD WAY TO SELL

Your chiller.
Our crew.

We buy industrial chillers across Oklahoma — and take the removal work off your hands.

From an idle mechanical room to a full facility shutdown, we purchase water-cooled and air-cooled chillers in all tonnages and refrigerants. Centrifugal, screw or scroll: send us the details and we’ll take a look.

We buy only. We don’t sell equipment. Our team handles refrigerant recovery, disconnects, crane and rigging, loading, freight and hauling so you can move on from surplus equipment without managing the heavy lifting.

Talk to a buyer   (614) 715-3047
Owner-supplied photograph of industrial chiller equipment
REAL EQUIPMENT. REAL EXPERIENCE.OK / 01

02 / A SIMPLE PROCESS

From nameplate
to paid.

No testing required. No freight to arrange. No unnecessary runaround.

01

Send the details

Tell us what you have. A nameplate photo, location and a few equipment details are a great place to start.

02

Get a cash offer

We review your chiller and make an offer. Payment is upfront when we purchase your equipment.

03

We handle removal

Our crew coordinates disconnects, refrigerant recovery, crane and rigging, loading, freight and hauling.

03 / BUYER'S GUIDE

A practical way to sell screw chillers in Norman, Oklahoma

If you have screw chillers in Norman, Oklahoma, start with the equipment's actual condition and location. We buy used industrial chillers, including machines from 20 to 2,000+ tons, and consider all tonnages and refrigerants. Equipment can come from data centers, decommissioned power plants, refineries, manufacturing shutdowns, hospitals and campuses. The buyer handles crane work, rigging, refrigerant recovery, disconnects, loading and hauling, with all freight covered. No testing is required. Cash offers and payment upfront are available after the equipment and transaction are reviewed.

Screw chiller circuits and compressor information

A screw chiller uses one or more rotary screw compressors; it can appear in either an air-cooled package or a water-cooled plant configuration. Photograph each compressor and its identification tag when accessible, along with the main chiller plate. Note whether the unit has multiple refrigeration circuits, whether any compressor has been removed, and whether controls remain attached. Those observations are more useful than assuming the entire machine is in the same condition. Access needs vary with the package dimensions and its position relative to other mechanical equipment. For this equipment, describe missing compressors, detached controls or visible oil residue, while leaving diagnosis to a qualified technician. If an item is not visible or its history is unknown, say so rather than assigning it a condition. Drawings or records are helpful when available, but the first conversation can begin with clear photographs and the information already on hand.

Nameplates and photographs for screw chillers

Gather the primary equipment plate, overall views and close photographs of major components. The capacity, refrigerant, voltage, model and serial fields make a more useful starting point than an approximate age or a verbal brand description. If there are multiple machines, keep each set of photographs and numbers together so their capacities and conditions are not accidentally mixed. An illegible plate can be described as such; do not invent a model, refrigerant charge or shipping weight. For screw chillers, record the main unit model and capacity plus legible compressor model numbers and circuit labels.

Access and site details for Norman

For a Norman facility, distinguish a standalone building chiller from a unit connected to a shared campus or central-plant loop. Show the entrance and the path through any mechanical room, and tell the buyer if pedestrian routes or occupied buildings need protection. The facility team can identify which utilities and equipment must remain in service. In particular, show the compressor side, connected piping, clearance around the frame and any tight approach to the unit. Give approximate measurements where possible and identify a contact who knows the property. These observations support a site-specific plan; they do not replace a professional evaluation of the lifting route or the ground.

Refrigerant and isolation for screw chillers

The owner should not open a refrigerant line, vent a charge or energize a retired unit to prepare it for review. The buyer handles refrigerant recovery and disconnects as part of the arranged removal. Facility personnel and the qualified removal team should agree on electrical, water and other utility isolation boundaries before work begins. Tell them about known leaks, prior recovery, disconnected wiring or shared piping; if the status is unknown, say so. A visible disconnect alone does not prove every energy source has been isolated. For this machine, identify each marked refrigeration circuit and report any known refrigerant leaks or previous recovery without disturbing the system.

Rigging, loading and freight for screw chillers

Removal is arranged by the buyer, including any crane work, rigging, loading and hauling; all freight is covered. A removal team must still assess the specific unit and property. Give approximate outside dimensions, a documented shipping weight if available, and photographs of doorways, steps, obstructions and the potential truck area. Explain whether a roof, pit, enclosed yard or shared driveway is involved. Never assume that a unit can be lifted from an unverified attachment point or that a particular route will be approved. The chiller configuration helps identify what to photograph, but it does not establish the machine's center of gravity, lifting points or shipping weight. Those details need verification for the specific unit.

Cash offers and condition review for screw chillers

Our business buys used industrial chillers; it does not sell chillers. You can request a cash offer with payment upfront, and the equipment does not need to be tested. A useful description identifies the machine, current condition, included components and the location from which it would be removed. Any offer is subject to review and agreement, including verification that the seller is authorized to transfer the chiller. Known damage or missing documentation should be disclosed instead of hidden or guessed. Describe the actual compressor, condenser and control arrangement instead of assuming every machine of this type has the same components.

Preparing for equipment handoff in Norman

Before coordinating a pickup, identify the property contact, the authorized equipment owner and any documentation the facility needs for a transfer. Make a list of chiller components to be included and separately identify items that remain with the building. Share site entry rules, available drawings and the known status of electrical, water and refrigerant connections. Photographs should reflect the present condition. The parties can then agree on the details of access, removal and payment without relying on an assumed installation or an unverified schedule. To start, call (614) 715-3047, text photos, or email saleselectricalbuyers@gmail.com. Include the site city or county and a good contact number, but do not enter restricted areas merely to take pictures.

05 / TELL US WHAT YOU HAVE

Ready to sell
your chiller?

Share what you know. If you don’t have every detail, send a nameplate photo and we can start there.

Request a Quote

Tell us about your equipment. Fields marked * are required.

JPG or PNG; total attachments up to 10 MB.

Form submissions and photos are processed by FormSubmit. Prefer to send photos from your phone? Text them to us instead.

Request a Quote