OKLAHOMA-WIDE INDUSTRIAL CHILLER BUYERSBUYING ONLY  /  NEVER SELLINGsaleselectricalbuyers@gmail.com
Industrial chiller equipment

Edmond chiller buyers · Manufacturer

Sell York Chillers In Edmond, Oklahoma

Sell York chillers in Edmond, Oklahoma. Request a cash offer with payment upfront; no testing is required, and the buyer handles removal and freight.

Upfront payment. We handle the heavy lifting.

Payments Upfront
No Testing
We Cover All Freight
All Tonnages Bought

01 / THE STRAIGHTFORWARD WAY TO SELL

Your chiller.
Our crew.

We buy industrial chillers across Oklahoma — and take the removal work off your hands.

From an idle mechanical room to a full facility shutdown, we purchase water-cooled and air-cooled chillers in all tonnages and refrigerants. Centrifugal, screw or scroll: send us the details and we’ll take a look.

We buy only. We don’t sell equipment. Our team handles refrigerant recovery, disconnects, crane and rigging, loading, freight and hauling so you can move on from surplus equipment without managing the heavy lifting.

Talk to a buyer   (614) 715-3047
Owner-supplied photograph of industrial chiller equipment
REAL EQUIPMENT. REAL EXPERIENCE.OK / 01

02 / A SIMPLE PROCESS

From nameplate
to paid.

No testing required. No freight to arrange. No unnecessary runaround.

01

Send the details

Tell us what you have. A nameplate photo, location and a few equipment details are a great place to start.

02

Get a cash offer

We review your chiller and make an offer. Payment is upfront when we purchase your equipment.

03

We handle removal

Our crew coordinates disconnects, refrigerant recovery, crane and rigging, loading, freight and hauling.

03 / BUYER'S GUIDE

A practical way to sell York chillers in Edmond, Oklahoma

If you have York chillers in Edmond, Oklahoma, start with the equipment's actual condition and location. We buy used industrial chillers, including machines from 20 to 2,000+ tons, and consider all tonnages and refrigerants. Equipment can come from data centers, decommissioned power plants, refineries, manufacturing shutdowns, hospitals and campuses. The buyer handles crane work, rigging, refrigerant recovery, disconnects, loading and hauling, with all freight covered. No testing is required. Cash offers and payment upfront are available after the equipment and transaction are reviewed.

York chiller model, drive and starter information

York chillers may have very different physical layouts, from outdoor packaged machines to large indoor units. The model number, rated tons and a photograph of the entire assembly are useful for distinguishing the unit. Include any available information about a separate starter, variable-speed drive or control cabinet, but do not assume these pieces are integral or included. If a plate is worn, photos of other readable labels, maintenance records and the general configuration can help clarify what is available. For this equipment, describe which York controls, drives and associated loose parts the owner can transfer with the machine. If an item is not visible or its history is unknown, say so rather than assigning it a condition. Drawings or records are helpful when available, but the first conversation can begin with clear photographs and the information already on hand.

Nameplates and photographs for York chillers

Gather the primary equipment plate, overall views and close photographs of major components. The capacity, refrigerant, voltage, model and serial fields make a more useful starting point than an approximate age or a verbal brand description. If there are multiple machines, keep each set of photographs and numbers together so their capacities and conditions are not accidentally mixed. An illegible plate can be described as such; do not invent a model, refrigerant charge or shipping weight. For York chillers, record the exact York model, serial number, rated capacity, supply voltage and refrigerant.

Access and site details for Edmond

An Edmond chiller may serve an individual building or share a plant with other occupied spaces. Identify the machine being removed, nearby equipment that must stay in operation and the service entrance available for equipment movement. Photos showing corridors, doors and possible outdoor staging space are more useful than an address alone. In particular, show any separate drive or starter and the clearance around both the chiller and connected piping. Give approximate measurements where possible and identify a contact who knows the property. These observations support a site-specific plan; they do not replace a professional evaluation of the lifting route or the ground.

Refrigerant and isolation for York chillers

Before a chiller is moved, the actual refrigerant and utility connections need a site-specific plan. The buyer handles refrigerant recovery and disconnects; the facility and removal personnel coordinate the isolation points and safe access. Share the refrigerant label, any known conversion, and whether water or electrical connections still appear intact. Do not open valves, dismantle piping or start the equipment just to obtain an offer. If the charge or isolation status is uncertain, reporting that uncertainty is useful. For this machine, identify the refrigerant from the nameplate and indicate whether electrical or refrigerant connections are still intact.

Rigging, loading and freight for York chillers

For an agreed purchase, the buyer handles rigging and crane requirements, loading and hauling, with all freight covered. Tell the team if the chiller is above grade, below grade or in a crowded machine room, and whether a gate or roof edge limits access. Manufacturer drawings, original shipping dimensions and lifting instructions can support the assessment if available. The physical route, possible staging area and safe lift points must be checked for the particular job; cooling tonnage is not a lifting specification. If manufacturer rigging instructions or an equipment drawing are available, identify the exact model they apply to. A different unit from the same manufacturer may have different dimensions or lifting points.

Cash offers and condition review for York chillers

The purpose of this service is to buy equipment, not sell it. We make cash offers and pay upfront, with no testing required. Before an offer is agreed, the buyer reviews the chiller details, what is included, ownership and site access. A machine's age, condition or missing records should be described honestly rather than presented as an assumed operating state. Submitting information is not a guarantee that a particular unit will be purchased or that a specific removal method will be feasible. The exact model and serial number are more useful than the brand name by itself; list any separate controls or starter that are included.

Preparing for equipment handoff in Edmond

Before coordinating a pickup, identify the property contact, the authorized equipment owner and any documentation the facility needs for a transfer. Make a list of chiller components to be included and separately identify items that remain with the building. Share site entry rules, available drawings and the known status of electrical, water and refrigerant connections. Photographs should reflect the present condition. The parties can then agree on the details of access, removal and payment without relying on an assumed installation or an unverified schedule. To start, call (614) 715-3047, text photos, or email saleselectricalbuyers@gmail.com. Include the site city or county and a good contact number, but do not enter restricted areas merely to take pictures.

05 / TELL US WHAT YOU HAVE

Ready to sell
your chiller?

Share what you know. If you don’t have every detail, send a nameplate photo and we can start there.

Request a Quote

Tell us about your equipment. Fields marked * are required.

JPG or PNG; total attachments up to 10 MB.

Form submissions and photos are processed by FormSubmit. Prefer to send photos from your phone? Text them to us instead.

Request a Quote